Adjusting Color Registration; Performing Auto Adjust - Dell C1765NFW User Manual

3 Clean the CTD sensor inside the printer with a clean dry cotton swab.
4 Close the rear cover.
5 Turn on the printer.

Adjusting Color Registration

This section describes how to adjust the color registration when you first install the printer or after moving it to a
new location.
NOTE:
A password is required to enter the
enter the password you specified, and press the

Performing Auto Adjust

Auto Adjust allows you to correct the color registration automatically.
The Operator Panel
1 Press the (Menu) button.
2 Press the
button until System is highlighted, and then press the
3 Press the button until Admin Menu is highlighted, and then press the
4 Press the
button until Maintenance is highlighted, and then press the
5 Press the button until Adjust ColorRegi is highlighted, and then press the
6 Ensure that Auto Adjust is highlighted, and then press the
menu when
Admin Menu Panel Lock Set
(Set) button.
is set to
Enable
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
Maintaining Your Printer
. In this case,
325