Dell C1765NFW User Manual page 112

Fax Defaults
Fax Settings
110
Dell™ Printer Configuration Web Tool
Resolution
Lighter/Darker
Delayed Start
Receive Mode
Auto Receive Fax
Auto Receive Tel/Fax
Auto Receive Answer/Fax
Line Monitor
Ring Tone Volume
Line Type
Tone/Pulse
Resend Delay
Redial Attempts
Redial Delay
Junk Fax Setup
Remote Receive
Remote Receive Tone
Fax Header
Fax Header Name
Fax Number
Fax Cover Page
DRPD Pattern
Sent Fax Forward
Fax Forward Number
Prefix Dial
Prefix Dial Number
Discard Size
ECM
Modem Speed
Fax Activity
Displays the resolution level to be used for fax transmission.
Displays the default density level to be used for fax transmission.
Displays the fax transmission start time.
Displays the fax receiving mode.
Displays the interval at which the printer goes into the fax receive
mode after receiving an incoming call.
Displays the interval at which the printer goes into the fax receive
mode after the external telephone receives an incoming call.
Displays the interval at which the printer goes into the fax receive
mode after the external answering machine receives an incoming
call.
Displays the volume of the line monitor, which audibly monitors a
transmission through the internal speaker until a connection is
made.
Displays the volume of the ring tone, which indicates that an
incoming call is a telephone call through the internal speaker when
Receive Mode is set to Telephone/Fax.
Displays the line type.
Displays the dialing type.
Displays the interval between transmission attempts.
Displays the number of redial attempts.
Displays the interval between redial attempts.
Displays whether to reject faxes sent from unwanted numbers.
Displays whether to receive faxes by pressing a remote receive code
on the external telephone.
Displays the remote receive code to start Remote Receive.
Displays whether to print the information of sender on the header
of faxes.
Displays the name of sender to be printed on the header of faxes.
Displays the fax number to be printed on the header of faxes.
Displays whether to attach a cover page to faxes.
Displays the Distinctive Ring Pattern Detection (DRPD) setting.
Displays whether to forward incoming faxes to a specified
destination.
Displays the fax number of the destination to which incoming
faxes are to be forwarded.
Displays whether to set a prefix dial number.
Displays a prefix dial number. This number dials before any auto
dial number is started.
Displays whether to discard text or images at the bottom of a fax
page when the entire page does not fit onto the output paper.
Displays whether to enable the Error Correction Mode (ECM).
Displays the fax modem speed.
Displays whether to automatically print a fax activity report after
every 50 incoming and outgoing fax communications.