Dell C1765NFW User Manual page 134

Scan to PC
Purpose:
To specify the client when scanning data.
Values:
FTP Client
SMB Client
Reset Print Server
Purpose:
To initialize NVM (non-volatile memory) for the network feature and reboot the printer. You can also initialize the
NVM of the printer from Reset Defaults in the Printer Settings menu.
Values:
Initialize NIC NVRAM
memory and restart printer.
Restart Printer
Security
The Security tab contains the Set Password and IP Filter (IPv4) pages.
Set Password
Purpose:
To set or change the password that is required to access the setup parameters of the printer from the Dell Printer
Configuration Web Tool.
This page can also be displayed by clicking Set Password in the left frame.
NOTE:
If you forgot your password, initialize NVM (non-volatile memory) to restore the password to the default (NULL). See
"Reset Print Server" on page 132.
NOTE:
When you change the password to lock the operator panel, set the password from Panel Lock Set in the Printer Settings.
Values:
Administrator Password
Re-enter Administrator
Password
132
Dell™ Printer Configuration Web Tool
Connection Time-Out
FTP Passive
Connection Time-Out
Click Start to initialize NVM. Network settings will revert to the factory default settings and
reboot the network capability.
Click Start to reboot the printer.
Sets the password using up to 10 alphanumeric characters. The password will appear as asterisks
(*) in the field when it is entered.
Enter the password again to confirm.
Sets the connection time-out period from 1 to 60 seconds.
Sets whether to enable the FTP Passive mode.
Sets the connection time-out period from 1 to 60 seconds.