Adjusting The Color Contrast; Clearing Memory - Dell 2145cn Service Manual

■ ADJUSTING THE COLOR CONTRAST

Color menu allows you to adjust the color setting.
1. Press Menu until System Setup appears on the bottom line of the display and press OK.
2. Press OK when Maintenance appears.
3. Press the left/right arrow until Color appears and press OK.
4. Press the left/right arrow until the menu you want appears on display and press OK.
• Custom C olor:Allows you to adjust contrast color by color. Default optimizes color automatically. Manual
Adjust allows you to manually adjust the color contrast for each cartridge. Default setting is recommended
for getting best color quality.
• Auto Color Reg.: Allows you to adjust the position of print color texts or graphics to match the original file
on your screen.
5. Press Stop/Clear to return to ready mode.

■ CLEARING MEMORY

You can selectively clear information stored in your machine's memory.
1. Press Menu until System Setup appears on the bottom line of the display and press OK.
2. Press the left/right arrow until Clear Setting appears and press OK.
3. Press the left/right arrow until the item you want to clear appears.
OPTIONS DESCRIPTION
All Settings Clears all of the data stored in memory and resets all of your settings to the factory
default.
Fax Setup Restores all of the fax options to the factory default.
Copy Setup Restores all of the copy options to the factory default.
Scan Setup Restores all of the scan options to the factory default.
System Setup Restores all of the system options to the factory default.
Network Restores all of the network options to the factory default.
Address Book Clears all of the fax number and email address entries stored in memory.
Sent Report Clears all records of sent faxes and emails.
Fax RCV Report Clears all records of received faxes.
NetScan Report Clears the information on network scan sessions in memory.
4. Press OK when Yes appears.
5. Press OK again to confirm clearing.
6. Repeat steps 3 through 5 to clear another item.
7. Press Stop/Clear to return to ready mode.
Alignment and Troubleshooting
4-20