Margin Top/Bottom; Margin Left/Right - Dell C1765nf Color Laser User Manual

2 Press the (Copy) button.
3 Press the button until Multiple-Up is highlighted, and then press the
4 Press the button to select the desired setting, and then press the
NOTE:
Values marked by an asterisk (
Off*
Auto
ID Copy
Manual
5 If necessary, customize the copy settings including the number of copies, contrast, and image quality. See "Setting
Copy Options" on page 235.
6 Press the (Start) button to begin copying.
When you are using the document glass and Multiple-Up is set to Auto, ID Copy, or Manual, the display
prompts you for another page. Press the
7 If you select Yes, press the

Margin Top/Bottom

To specify the top and bottom margins of the copy.
1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Loading an Original Document on the ADF" on page 272.
2 Press the (Copy) button.
3 Press the
button until Margin Top/Bottom is highlighted, and then press the
4 Press the or button or enter the desired value using the numeric keypad, and then press the
button.
NOTE:
Values marked by an asterisk (
4 mm*/0.2 inch*
Available Range:
0-50 mm/0.0-2.0 inch
5 Press the (Start) button to begin copying.

Margin Left/Right

To specify the left and right margins of the copy.
1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Loading an Original Document on the ADF" on page 272.
*
) are the factory default menu settings.
Does not perform multiple-up printing.
Automatically reduces the original pages to fit onto one sheet of paper.
Prints the original pages onto one sheet of paper in the original size.
Prints the original pages onto the one sheet of paper in the size specified in
button to select Yes or No, and then press the
button to select Continue or Cancel, and then press the
*
) are the factory default menu settings.
Specify the value in increments of 1 mm/0.1 inch.
(Set) button.
(Set) button.
Reduce/Enlarge
(Set) button.
(Set) button.
(Set) button.
Copying
.
(Set)
241