Draytek Vigor2930 Series User Manual page 163

Detail Information
igor2930 Series User's Guide
match with the settings specified here and IGMP Service Port
also fits the number here, such binding tunnel table can be
established. Other means when the source IP, destination IP,
destination port and fragment conditions match with the
settings specified here with different TCP Service Port/UDP
Service Port/ICMP/IGMP, such binding tunnel table can be
established.
This field will display detailed information for Binding
Tunnel Policy. Below shows a successful binding tunnel
policy for load balance:
Note : To configure a successful binding tunnel, you have
to:
Type Binding Src IP range (Start and End) and Binding
Des IP range (Start and End) Choose YES or NO for
Binding Fragmented. If you choose YES for Binding
Fragmented, you don't need to choose Binding Protocol.
Type Binding Src IP range (Start and End) and Binding
Des IP range (Start and End). Choose YES or NO for
Binding Fragmented. If you choose NO for Binding
Fragmented, please choose TCP/UDP, IGMP/ICMP or
Other as Binding Protocol.
155