Ipsec Peer Identity - Draytek Vigor2930 Series User Manual

Method
IPSec Security Method
3 . 9 . 6 I P S e c P e e r
3 . 9 . 6 I P S e c P e e r
To use digital certificate for peer authentication in either LAN-to-LAN connection or
Remote User Dial-In connection, here you may edit a table of peer certificate for selection.
As shown below, the router provides 100 entries of digital certificates for peer dial-in users.
Set to Factory Default
Index
Name
Click each index to edit one peer digital certificate. There are three security levels of digital
signature authentication: Fill each necessary field to authenticate the remote peer. The
following explanation will guide you to fill all the necessary fields.
(LAN-to-LAN) which uses dynamic IP address and
IPSec-related VPN connections such as L2TP over IPSec
and IPSec tunnel.
Certificate for Dial-in – Choose the one you need.
Pre-Shared Key -Currently only support Pre-Shared Key
authentication.
Pre-Shared Key- Specify a key for IKE authentication
Confirm Pre-Shared Key- Retype the characters to confirm
the pre-shared key.
Medium - Authentication Header (AH) means data will be
authenticated, but not be encrypted. By default, this option is
active.
High - Encapsulating Security Payload (ESP) means payload
(data) will be encrypted and authenticated. You may select
encryption algorithm from Data Encryption Standard (DES),
Triple DES (3DES), and AES.
I d e n t i t y
I d e n t i t y
Click it to clear all indexes.
Click the number below Index to access into the setting page
of IPSec Peer Identity.
Display the profile name of that index.
130
Vigor2930 Series User's Guide