Bandwidth Limit - Draytek Vigor2930 Series User Manual

3 . 7 . 2 B a n d w i
3 . 7 . 2 B a n d w i
The downstream or upstream from FTP, HTTP or some P2P applications will occupy large
of bandwidth and affect the applications for other programs. Please use Limit Bandwidth to
make the bandwidth usage more efficient.
In the Bandwidth Management menu, click Bandwidth Limit to open the web page.
To activate the function of limit bandwidth, simply click Enable and set the default upstream
and downstream limit.
Enable
Disable
Default TX limit
Default RX limit
Allow auto adjustment to
make the best utilization
of available bandwidth
Limitation List
Start IP
End IP
igor2930 Series User's Guide
d t h L i m i t
d t h L i m i t
Define the default speed of the upstream for each computer in
LAN.
Define the default speed of the downstream for each computer
in LAN.
Display a list of specific limitations that you set on this web
page.
Define the start IP address for limit bandwidth.
Define the end IP address for limit bandwidth.
Click this button to activate the function of limit bandwidth.
Click this button to close the function of limit bandwidth.
Router will detect if there is enough bandwidth remained for
using according to the bandwidth limit set by the user. If yes,
the router will adjust the available bandwidth for users to
enhance the total utilization.
101