HP 3000 III Series Manual page 367

SYSTEM INSTALLATION
I~
This section contains information for installing the HP 3000 Ser-
ies III Computer Systems and ensur ing that the systems are oper-
ating in accordance with factory specifications. It should be
noted that before a system can be installed, a site must be pre-
pared in accordance with the information contained in the
appli~
able Computer System Site Preparation Manual and COmputer System
Site Planning Workbook. (For HP 32421A Series III Computer Sys-
tems, refer to the HP 3000 Computer System Site Preparation Man-
ual, part no. 30000-90082 and the HP 3000 Computer System Site
Planning WOrkbook, part no. 30000-90086. For HP 32435A Series
III Computer Systems, refer to the HP 3000 Computer System Site
Preparation Manual, part no. 30000-90145 and the HP 3000 Computer
System Site Planning Workbook, part no. 30000-90146.) It should
also be noted that site preparation is the responsibility of the
customer and not Hewlett-Packard's unless it has been negotiated
as a separate contract. For additioqal'installation information,
refer to the applicable HP 3000 Computer System Installation Man-
ual (part no. 30000-90081 for the HP 32421A Series III Computer
Systems and part no. 30000-90147 for the HP 32435A Series III
Computer Systems).
This section is divided into two parts. Part One (paragraphs
(11-1 through 11-10) contains information strictly for the HP
32421A Series III Computer System. Part Two (paragraphs 11-11
through 11-17) contains information strictly for the HP 32435A
Ser ies III Computer System.
PART ONE
HP 32421A SERIES III COMPUTER SYSTEM INSTALLATION
11-1. EQUIPMENT BAY INSTALLATION
WARNING
Do not attempt to slide or swing out any
equipment from the bays, or cabinets until
they are completely installed, the Anti-Tip
Base Extensions extended, and cabine t feet
lowered. Failure to comply may result in
serious injury or death and severe damage
to equipment.