Reconfigurations, which must be linked to the DRIVE-CLiQ slave with a message "Timing
change" are:
● Changes to the DRIVE-CLiQ clock cycle for the component.
● Changes to oversampling settings which require internal reconfiguration of the time-slice
system.
Please also note the following:
● Changes to component connections and longer cables between components require
adjustments to signal propagation delays and therefore also change the timing.
Drive functions
Function Manual, 06/2019, 6SL3097-5AB00-0BP2
Basic information about the drive system
14.11 DRIVE-CLiQ
833