14.7
Write protection
Note
Write protection is only available with the STARTER commissioning tool.
The write protection prevents unauthorized changing of the drive unit settings. If you are
working with a commissioning tool, such as STARTER, then write protection is only effective
online. The offline project is not write-protected.
The following interfaces are write-protected:
● STARTER commissioning tool
● Parameter changes via fieldbus
No password is required for write protection.
Setting up and activating write protection
1. Go online.
2. Select the required drive unit in the project navigator of your STARTER project.
Drive functions
Function Manual, 06/2019, 6SL3097-5AB00-0BP2
Basic information about the drive system
14.7 Write protection
805