Siemens SINAMICS S120 Function Manual page 821

Configuring know-how protection
Make the settings for the know-how protection on the "Drive unit know-how protection" tab.
1. Click the "Drive unit know-how protection" tab.
Figure 14-20
By default, the "Without know-how protection" option is active. If you really want to store the
data without protection (not recommended), you can exit the dialog box with "OK" or
"Cancel" at this point.
2. If you want to store with protection, activate one of the following options with a mouse click:
– "Know-how prot. without copy prot."
– "Know-how protection with basic copy protection (permanently linked to the memory
– "Know-how protection with extended copy protection (permanently linked to the memory
The input fields for the passwords and the serial numbers appropriate for the activated know-
how protection are then active.
Drive functions
Function Manual, 06/2019, 6SL3097-5AB00-0BP2
Load to file system know-how protection
Required inputs: "New password" and "Confirm password"
card)"
Required inputs: "New password", "Confirm password" and "Memory card specified
serial number"
card and CU)"
Required inputs: "New password", "Confirm password" "Memory card specified serial
number" and "Control unit specified serial number"
Basic information about the drive system
14.8 Know-how protection
819