Applications
12.2 Switch on infeed unit via a drive axis
12.2
Switch on infeed unit via a drive axis
Using this BICO interconnection, a drive object (DO) "X_INF" (= all drive objects "Infeed"; i.e.:
A_INF, B_INF, S_INF) can be activated by a "SERVO/VECTOR" drive object. This switch-on
version is mainly used for drive units in the "chassis" format if a single Infeed Module and a
Motor Module are used.
Figure 12-1
If an application requires an automatic restart function (AR), (see Chapter Automatic restart
(Page 328)), then the following extended interconnection applies:
694
BICO interconnection: Switching on an infeed by a drive
Function Manual, 06/2019, 6SL3097-5AB00-0BP2
Drive functions