Samsung iDCS 500 Programming Manual page 425

iDCS 500
TECHNICAL MANUAL
MMC: 854
DESCRIPTION:
Provides a means to set the iDCS 500 Diagnostic Time. The iDCS 500 diagnostics
tests include memory audits, internal loopback tests on digital trunks, DSP, CID
DSP, AA DSP tests. Additional tests include CODEC tests on analog trunk and
station cards and tone tests. If the diagnostics cannot complete the tests because of
system traffic, the system will abort the test and retry during the next programmed
diagnostic time. It is recommended to assign the diagnostic time during non-peak
traffic periods.
✳ Diagnostics are only available on a system with a LAN module installed on the
MCP card.
DIAL PAD DAY SELECTION:
0= Sunday
6 = Saturday
5 = Friday
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ACTION
1. Press TRSF 854
Display shows
2. Press RIGHT soft key to move cursor
3. Enter military time hour via the dial pad.
Cursor will advance to next entry.
4. Enter military time minutes via the dial pad.
Cursor will advance to Step 1.
2 = Tuesday
1= Monday
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
PART 2 NOVEMBER 2001
DIAGNOSTIC TIME
4 = Thursday
3 = Wednesday
DISPLAY
DIAGNOSTIC TIME
SUN: :
DIAGNOSTIC TIME
SUN: :
DIAGNOSTIC TIME
SUN:23:
DIAGNOSTIC TIME
SUN:23:30
HOME
PAGE
PROGRAMMING
Table of
Contents
HELP