Samsung iDCS 500 Programming Manual page 144

iDCS 500
TECHNICAL MANUAL
MMC: 411
DESCRIPTION:
Defines the type of signaling for each T1 trunk assigned to the card. There are four
kinds of trunks as detailed below. There are three types of signaling associated with
E & M and DID. T1 channels (1-24) that are not used should have TYPE
programmed as UNUSED.
MODE TRUNK
0 LOOP
1 GROUND
2 E & M
3 DID
4 UNUSED
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ANS/RLS
ACTION
1. Press TRSF 411
Display shows
2a. Enter desired trunk number (e.g., 705)
OR
Press UP or DOWN key to make selection
Press RIGHT soft key to move cursor
OR
Press ANS/RLS to select all trunks
ASSIGN T1 SIGNAL TYPE
IMMEDIATE
IMMEDIATE
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to select ALL
PROGRAMMING
PART 2 NOVEMBER 2001
SIGNALLING
DELAYED
DELAYED
DISPLAY
[701] T1 SIGNAL
UNUSE
[705] T1 SIGNAL
UNUSE
[ALL] T1 SIGNAL
?
HOME
PAGE
Table of
Contents
HELP
WINK
WINK