Samsung iDCS 500 Programming Manual page 125

iDCS 500
TECHNICAL MANUAL
MMC: 401
DESCRIPTION:
Used to select the mode of the C.O. line. If the PBX mode is chosen, this allows PBX
access codes to be recognized, thus allowing more complete toll restriction (call
barring). This mode is assigned on a per-trunk basis.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION
1. Press TRSF 401
Display shows
2. Dial trunk number (e.g., 704)
OR
Use UP or DOWN to scroll through trunk
numbers and press RIGHT soft key to move
OR
Press ANS/RLS to select ALL
3. Dial 1 for PBX or 0 for C.O.
OR
Use UP or DOWN to scroll through options
Press RIGHT soft key to return to step 2
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next
MMC
DEFAULT DATA: ALL TRUNKS C.O. LINE
RELATED ITEMS: NONE
PROGRAMMING
PART 2 NOVEMBER 2001
C.O./PBX LINE
DISPLAY
[701] PBX LINE
CO LINE
[704] PBX LINE
CO LINE
[ALL] PBX LINE
?
[704] PBX LINE
PBX LINE
HOME
PAGE
Table of
Contents
HELP