Samsung iDCS 500 Programming Manual page 269

iDCS 500
TECHNICAL MANUAL
2.7 VOICE MAIL SOUND FILE: If the iDCS 500 system has an optional
CADENCE card installed, up to 100 custom recorded sound files from the
Voice Mail card can be used for MOH sources. Select the CADENCE port
assigned in MMC 748. For information on creating the sound files see
CADENCE System Administrator Manual-Recording greeting by number.
If you select this option be advised that each VMMOH source requires a
dedicated CADENCE port/channel.
3. 1: XXX, 2: XXX, 3: XXX, 4: XXX, 5: XXX, 6:XXX = ring plan and destination during
each ring plan. The destination can be a station, station group, trunk or trunk
group. If trunk or trunk group is selected the trunks must be programmed as
E&M trunks to allow the received digits to be re-sent on the facility(s). This is
referred to as DID Repeat digits over tie line.
NOTE: An entry of the character "B" means to repeat the received digits.
4. CW: = Call waiting Yes/No . Allow a second DID call to be received
5. DELETE: The number of digits to delete. This is useful with Tandem switching,
mixed numbering plans and DID Repeat digits over tie line. Maximum number of
digits that can be deleted is 16.
6. MC: This is the maximum number of simultaneous calls to this DID the system
will allow. If more call attempts are made the system will return a busy signal to
the caller.
7. NAME = Input up to 11 characters to identify call.
Names are written using the keypad. Each press of a key selects a character.
Pressing the dial pad key moves the cursor to the next position. For example, if
the directory name is "SAM SMITH," press "7" three times to get the letter "S."
Press "2" once to get "A." Continue selecting characters from the table below to
complete your message. Pressing the bottom left programmable key changes
the letter from upper case to lower case.
NOTE: When the character you want appears on the same dial pad key as the
previous character, press the UP key to move the cursor to the right.
•
DCS KEYSETS
COUNT
DIAL 0
DIAL 1
DIAL 2
DIAL 3
DIAL 4
DIAL 5
MMC: 714
1 2
Q Z
space ?
A B
D E
G H
J K
PART 2 MARCH 2003
3 4
. )
, !
C @
F #
I $
L %
PROGRAMMING
Table of
Contents
5
0
1
2
3
4
5
HOME
PAGE
HELP