Samsung iDCS 500 Programming Manual page 411

iDCS 500
TECHNICAL MANUAL
ALM
ALARM
CODE
MJA01 POR Restart
MJA02 Soft Restart
MJA03 Mem Reset
MJA04 MCP Reset
MJA05 LCP Reset
MJA06 PCM Switching
MJB01 HDLC Com Error
MJB02 Memory Alarm 1
MJB03 Memory Alarm 2
MJB04 Memory Alarm 3
MJB05 Memory Alarm 4
MJB06 IPC MSGQ Over
MMC: 851
ALARM CODE DEFINITIONS
MCP restarts process has been executed via power on restart
(POR).
MCP restart process has been executed via button reset.
The system RAM has been cleared via manual programming
(PCMMC or KMMC) resulting in a system reset.
The MCP has reset.
Alarm data = Reason
•
BUS ERR: Restart Bus Error
•
ADDR.ERR: Restart Address Error
•
ILLEGAL: Restart illegal code
•
ZERO DIVID: Restart Zero divide
•
PRIVILEGE: Restart Privilege Violation
•
VECTOR 1: Restart Auto Vector Level 1
•
DTACK RD: Restart Auto Vector Level 2
•
DTACK WR: Restart Auto Vector Level 3
•
VECTOR 4: Restart Auto Vector Level 4
•
VECTOR 5: Restart Auto Vector Level 5
•
VECTOR 6: Restart Auto Vector Level 6
•
WR PROTECT: Restart Auto Vector Level 7
•
ENDL LOOP: Restart Endless Loop
The SCP or LCP has reset.
Alarm data = Cabinet (1, 2 or 3)
A fault has occurred in the Switching Control.
Alarm data = MCP BASE, ESM OPT:1, ESM OPT:2 or ESM
OPT:3
Communications to Local Control Processor lost or faulty.
A RAM diagnostic check error has occurred in the MCP.
A RAM diagnostic check error has occurred in the SCP.
A RAM diagnostic check error has occurred in the LCP 1.
A RAM diagnostic check error has occurred in the LCP 2.
IPC TX queue full error has occurred in the MCP.
Alarm data = IPC Queue type
(MCP-LAN, MCP-SCP, MCP-LCP1, MCP-LCP2)
PROGRAMMING
PART 2 AUGUST 2003
DEFINITION
HOME
PAGE
Table of
Contents
HELP