Samsung iDCS 500 Programming Manual page 406

iDCS 500
TECHNICAL MANUAL
MMC: 836
DESCRIPTION:
Provides a means to means to set the ITM3 Gatekeeper options for identification to
a network gatekeeper. The settings are selectable for each ITM card installed.
NOTE: Programming MUST be exited before changes to the ITM3 take effect.
• GK CONNECT This determines if the ITM3 is to connect to a gatekeeper. The
options are disable or enable.
• GK TYPE This determines if connected to a Samsung SIGK or other type of
gatekeeper.
• GK IP This is gatekeepers IP address.
• GK NAME This is name identifier of the gatekeeper. The name can be
alphanumeric. An entry of 9 alphanumeric character with a space followed by an
additional 6 alpha-numeric characters.
• GW H.323 ID This is the H.323 identifier of the ITM3 that is registered with the
gatekeeper. This can be up to 16 characters.
• GW E.164 NUMBER This is the E.164 identifier of the ITM3 that is registered
with the gatekeeper and can be up to 16 digits in length.
• RAS MANUAL; This enables or disables RAS (Registration, Administration and
Security) in logical control with a gatekeeper.
• GK ROUTING: This enables or disable the messaging to a gatekeeper to allow
the gatekeeper to route the call.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
PROGRAMMING
PART 2 JANUARY 2003
VoIP GK OPTION
HOME
PAGE
Table of
Contents
HELP