Samsung iDCS 500 Programming Manual page 190

iDCS 500
TECHNICAL MANUAL
KMMC DIGIT TIME
LCR ADVANCE TIME
LCR INTER DIGIT
MS LED ON TIME
OFF HOOK RING
OHVA ANSWER TIME
PAGE TIME OUT
PAGE TONE TIME
PARK RECALL TIME
PC-MMC LOCK OUT
PERI-UCD REPORT
POWER DOWN TIME
RECALL DISCONNECT This is the time an attendant recall will ring before being
RECALL WAIT TIME
SMDR START/DIAL
PULSE (ROTARY)
MMC: 501
This timer controls the grace period between programming
actions while in a programming session. The timer
automatically returns the system to secure programming
status.
This timer controls the duration of time before selecting the
next allowable route when a station is allowed to route
advance.
This timer controls the grace period between dialing valid
digits before accessing a trunk.
This timer controls the duration a Manual Signalling key will
remain on after use.
This timer controls the duration of time between ring bursts
to a user who has a camped-on call.
This timer controls the time duration of an OHVA call before
automatic rejection.
This timer controls the duration of a page announcement.
This timer controls the duration of tone burst heard over the
page prior to the page announcement.
This timer controls the duration of time a call is parked
before recalling to the call park originator.
This timer monitors the PCMMC activity, drops the link if no
action is created by PCMMC and returns the system back to
secure program status.
This timer is the interval that a periodic UCD report is
provided to an SIO port.
This timer monitors the power to the ROM pack to begin
shutdown status.
disconnected.
This is the time any recall (hold or transfer) continues to
recall at your station before it recalls to the operator.
This grace period timer starts SMDR recording for rotary
dialing. This timer also controls the LCD duration timer on
PROGRAMMING
PART 2 SEPTEMBER 2003
HOME
PAGE
Table of
Contents
HELP