Samsung iDCS 500 Programming Manual page 278

iDCS 500
TECHNICAL MANUAL
MMC: 720
DESCRIPTION:
Provides a tool for duplicating key assignment from one keyset to another. This can
be done on a per-station basis or on all stations, but not on a group of stations.
One limitation is that the original and target keysets must be of the same type (i.e.
same number of buttons).
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Moves cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION
1. Press TRSF 720
Display shows
2. Enter the station number to copy to (e.g.,
205)
OR
Press UP or DOWN keys to make selection
and press RIGHT soft key to move cursor
3. Enter station number to copy from (e.g.,
203) and cursor returns to step 2
OR
Press UP or DOWN keys to make selection
4. Press RIGHT soft key to return to step 2
OR
Press TRSF to store and exit
OR
Press SPK to store and advance to next
MMC
COPY KEY PROGRAMMING
DISPLAY
[201]
FROM:NONE
[205]
FROM:NONE
[205]
FROM:203
PROGRAMMING
PART 2 NOVEMBER 2001
COPY KEY
COPY KEY
COPY KEY
HOME
PAGE
Table of
Contents
HELP