Samsung iDCS 500 Programming Manual page 165

iDCS 500
TECHNICAL MANUAL
MMC: 424
DESCRIPTION:
This MMC is used to restart a BRI and a PRI card at the card level. This action is
required to update the processor on the BRI and PRI card to any changes in the
card setup MMC's and to put these changes into effect.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ANS/RLS
ACTION
1. Press TRSF 424
Display shows first BRI or PRI circuit
2. Dial first trunk on a BRI or PRI card
(e.g., 7133)
OR
Press UP or DOWN key to select the first
trunk and press RIGHT soft key to move the
cursor
3. Dial 1 for YES
OR
Dial 0 for NO
Pressing 1 or 0 will advance to step 4
4. Dial 1 for YES
OR
Dial 0 for NO
Pressing 1 or 0 will return to step 2
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
BRI AND PRI CARD RESTART
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to select ALL
PROGRAMMING
PART 2 NOVEMBER 2001
DISPLAY
[7025] RESTART
CARD RESTART?NO
[7133] RESTART
CARD RESTART?NO
[7133] RESTART
CARD RESTART?YES
[7133] RESTART
ARE YOU SURE?YES
HOME
PAGE
Table of
Contents
HELP