Samsung iDCS 500 Programming Manual page 38

iDCS 500
TECHNICAL MANUAL
MMC: 110
DESCRIPTION:
Allows the system administrator to set any of the keyset features listed below.
M L
VERSION VERSION
00 00
01 01
02 02
03 03
04 04
05 05
06 06
07 07
– 08
08 09
09 10
- 11
FEATURES
AUTO HOLD
AUTO TIMER
HEADSET USE
HOT KEYPAD
KEY TONE
PAGE REJOIN
RING PREF.
NOT FOR USA
AUTO CAMP-ON
NOT FOR USA
AME PSWD
DISP SPD NAME
STATION ON/OFF
DESCRIPTION
Automatically places an existing C.O. call
on hold if a CALL button, trunk key or trunk
route key is pressed during that call.
Automatically starts the stopwatch timer
during a C.O. call.
When ON, this feature
hookswitch allowing a headset user to
answer all calls by pressing the ANS/RLS
button.
When ON, this feature allows the user to
dial directory numbers without having to
first lift the handset or press the SPK
button.
Allows the user to hear a slight tone when
pressing buttons on keyset.
Allows the user to hear the latter part of
page announcements if keyset becomes
free during a page.
When OFF, requires the user to press the
fast flashing button to answer a ringing call
after lifting the handset.
This field is reserved and can not be used
for U.S. software.
Keyset users can allow intercom calls to
camp-on to other keysets without having to
press a CAMP-ON key.
If this option is set to YES, station users
who have AME set must enter their station
password to listen to messages being left.
If this option is set to ON the user will have
the name associated with the speed dial
number shown in the display after the
number has been dialed.
PROGRAMMING
PART 2 JUNE 2002
Table of
Contents
disables the
HOME
PAGE
HELP