Samsung iDCS 500 Programming Manual page 311

iDCS 500
TECHNICAL MANUAL
In the above example, if overflow information is turned off:
[ ]+[ ]+[ ]+[ ] (Nothing is sent)
A DID call rings the VM/AA directly:
[ B ]+[9999]+[ ]+[ ]
9999 are the DID digits from C.O.
In the above example, if did information is turned off:
[ ]+[9999]+[ ]+[ ]
A station transfers (blind or screened) a call (C.O., DID or intercom) to VM/AA
group or port. When the transferring station hangs up (blind transfer):
[ ]+[ ]+[ ]+[
A station (202) transfers a C.O. call (702) to a station (225) that is Call Forward
All to a VM/AA group or port. When the transferring station hangs up (blind
transfer) and the VM/AA group or port answers:
[ # ]+[225]+[x]+[702]
A station (202) transfers a C.O. call (702) to a group (501) that overflows to a
VM/AA group or port:
[ # ]+[501]+[ X ]+[702]
In the above example, if overflow information is turned off:
[ ]+[ ]+[ ]+[
A station (205) calls a VM/AA port or group :
[ ✱ ]+[205]+[ ]+[ ]
In the above example, if direct information is turned off:
[ ]+[ ]+[ ]+[ ] (Nothing is sent)
A station (205) calls using MESSAGE key:
[ ✱ ]+[205]+[ ]+[ ]
In the above example, if message information is turned off:
[ ]+[ ]+[ ]+[ ] (Nothing is sent)
A call (702) recalls back from station 225 to the VM/AA group:
[ # ]+[225]+[x]+[702]
In the above example, if recall and DN2/CO information are turned off:
[ ]+[ ]+[ ]+[ ] (Nothing is sent)
MMC: 726
] (Nothing is sent)
] (Nothing is sent)
PROGRAMMING
PART 2 NOVEMBER 2001
HOME
PAGE
Table of
Contents
HELP