Samsung iDCS 500 Programming Manual page 417

iDCS 500
TECHNICAL MANUAL
MMC: 852
DESCRIPTION:
This MMC allows the assignment of system alarms to ring and display the alarms on
stations that have the Alarm Key assigned. The System Alarm Key is programmed
in Station Key Assignments (MMC 722). System Alarm key programming is tenant
wide (tenant 1 and 2). Alarms not programmed to report to the System Alarm key
will still be retained in the maintenance alarm buffer for Alarm Reporting (MMC 851).
The alarm buffer located on the LAN module will hold up to 100 alarms on a First In
- First Out (FIFO) basis. Pressing the System Alarm key will silence the audible
alarm until another alarm is generated by the system. Alarm conditions that have
multiple causes i.e. T1 errors and synchronization loss will print all associated alarm
information if an SIO port is programmed as an ALARM port. The specific fault
alarm data can be displayed via MMC 851 System Alarm Reporting.
✳ System Alarm Reporting is only available on system with a LAN module installed
on the MCP card, this is where the alarm buffer is located.
NOTE: Alarm Notification Off/On (0/1) determines if the alarm provides a visual and
audible notification to the System Alarm key appearing on the selected
stations.
Pressing the System Alarm key and the release key will silence the audible
alarm only at the station that pressed the System Alarm key and the release
key. See alarm displays table for assignments.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
TRSF
ACTION
1. Press TRSF 852
Display shows
2. Enter desired Alarm Display number (eg. 16)
OR
Press the up and down keys to select
desired option and press the right soft key
and to advance the cursor.
SYSTEM ALARM ASSIGNMENTS
Used to scroll through system alarms.
Used to enter selections
Enter/leave option
Used to store data and move to next MMC
Enter/exit MMC
PROGRAMMING
PART 2 AUGUST 2003
DISPLAY
01:MJA01 ACT:OFF
POR Restart
16:MJC05 ACT:OFF
AC Pwr Loss
HOME
PAGE
Table of
Contents
HELP