Samsung iDCS 500 Programming Manual page 191

iDCS 500
TECHNICAL MANUAL
the
SMDR START/DTMF
SYS HOLD RECALL
TRANSFER RECALL
TSW CONN. DELAY
UCDS AUDIO ALARM
UCDS VISUAL ALARM
MMC: 501
the keysets. The duration time displayed and the SMDR time
duration will be the same.
This grace period timer starts SMDR recording for touchtone
dialing. This timer also controls the LCD duration timer on
the keysets. The duration time displayed and the SMDR time
duration will be the same.
This timer determines the time calls can be left on hold
before recalling back to the holding station. This is a
system-wide timer. Setting timer to 000 will defeat this
feature and no recalling will take place.
This timer determines the time transferred calls ring before
recalling. This is a system-wide timer.
This timer determines the length of time before the audio
path is connected to a CO line after seizure via LCR.
When an AA card is installed and the digital UCD package
enabled, this counter determines the maximum number of
seconds a call has been waiting at the UCD group before
the UCD group's SUPV key begins to flash along with an
audio alarm. For more UCD alarm conditions, see MMC
500.
When an AA card is installed and the digital UCD package
enabled, this counter determines the maximum number of
seconds a call at the UCD group before the UCD group's
SUPV key begins to flash as an alarm. For more UCD alarm
conditions, see MMC 500.
PROGRAMMING
PART 2 SEPTEMBER 2003
HOME
PAGE
Table of
Contents
HELP