Samsung iDCS 500 Programming Manual page 209

iDCS 500
TECHNICAL MANUAL
MMC: 513
DESCRIPTION:
This is a Hotel / Motel software specific MMC.
This MMC is where the check out time for guest rooms, the room clean timers, and
the check in grace period timer are set. These are system wide timers that affect all
rooms.
CHECK OUT TIME
ROOM CLEAN TIME
CHECK IN END TIME This timer is the beginning of the Check In Grace Period.
PROGRAM KEYS
KEYPAD
SPK
ACTION
1. Press TRSF 508
Display shows
2. Select the desired timer by dialing "O" or
"1"
Press UP or DOWN keys to make selection.
Press RIGHT soft key to advance cursor.
HOTEL / MOTEL TIMERS
0 = CHECK OUT TIME
1 = ROOM CLEAN TIME
2 = CHECK IN END TIME
If a room is occupied during the checkout time an additional
days room charge will be automatically added to the room
bill. If a room is flagged as HOLD the additional days room
charge will not be added. (Setting a room status to HOLD is
how a late check out can be performed.)
This is the time each day that the system will flag all
occupied rooms as NEEDS CLEANING.
Any room checked in after this time, and before the Check
Out Time, will not be charged an additional days room
charge, when the Check Out Time is reached.
Used to enter selections
Used to store data and advance to next MMC
PROGRAMMING
PART 2 SEPTEMBER 2002
DISPLAY
CHECK OUT TIME
HH:MM :
ROOM CLEAN TIME
HH:MM :
HOME
PAGE
Table of
Contents
HELP