Show Eco-Thin-Pro-Pool - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.1 Thin Provisioning Pool Management > show eco-thin-pro-pool

show eco-thin-pro-pool

This command displays the list of ECO schedules that are associated with Thin provisioning pools.
■
Syntax
show eco-thin-pro-pool
■ Parameter
No parameters.
■ Output
#Thin Pro
#No. Name
#
#00 TPP01
A B
A: Thin provisioning pool number
B: Thin provisioning pool name
C: Disk attribute that composes the Thin provisioning pool (Online/Nearline)
D: Reliability of the Thin provisioning pool (High/Middle/None)
E: Thin provisioning pool status
F: ECO schedule action. Whether the ECO schedule is associated is displayed.
G: ECO schedule number
(In the case of a schedule by a cooperative software, [128] is displayed.)
H: ECO schedule name
(In the case of a schedule by a cooperative software, [External] is displayed.)
I: Current status of a disk motor
J: Control status by a control command
■ Example(s)
The following example displays a list of all the Thin provisioning pools that have an ECO schedule associated
with them:
Thin Pro
No. Name
00 TPP01
01 TPP02
05 TPP05
Disk reli- Status
attri- ability
bute
Online High Available
C D E
Disk reli- Status
attri- ability
bute
Online High Available
Online Middle Available
Online High Available
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
ECO Schedule
Action No. Name
[ON] 1 SC001
F G H
ECO Schedule
Action No. Name
[ON] 1 SC001
[ON] 2 SC002
[ON] 5 SC005
90
Motor Control
Status Status
Active [OFF]
I J
Motor Control
Status Status
Active [OFF]
Active [OFF]
Active [OFF]
P2X0-1030-09ENZ0