Set Password - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.1 User Management > set password

set password

This command changes the password of the specified user. This command prompts an operator for the new
password after command input.
■ Syntax
set password [-name
■ Parameter
-name
■ Example(s)
The following example changes the password of the user account named "user1":
CLI> set password -name user1
Old Password :
New Password :
Confirm Password :
name
]
Optional. This parameter specifies the user account name to change a password. Only users
with the User Management policy can specify this parameter. Only one user name can be
specified at the same time. The new password is confirmed after command input. If omitted,
the password of the currently logged in user is changed.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
367
P2X0-1030-09ENZ0