Show Ftrpe-Migration - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.2 Flexible Tier Management > show ftrpe-migration

show ftrpe-migration

This command displays information for the FTRPE Migration sessions that are not complete. Completed FTRPE
Migration sessions cannot be displayed.
This command is only used to display information for migration sessions in which the destination is a Flexible
Tier Sub Pool (FTSP).
■ Syntax
show ftrpe-migration
■
Parameter
No parameters.
■ Output
# CLI> show ftrpe-migration
# FTRPE Destination
# ID Flexible Tier Sub Pool
# No. Name
# 7
A B
A: The move FTRPE ID
B: The move destination Flexible Tier Sub Pool number
C: The move destination Flexible Tier Sub Pool name
D: The FTRPE migration status
E: The FTRPE migration progress
F: The FTRPE migration error code
G: The move source RAID Group number
H: The move source RAID Group name
I: The move source RAID Group LBA count
J: The move source volume number
K: The move source volume name
■ Example(s)
The following example displays FTRPE Migration session information:
CLI> show ftrpe-migration
FTRPE Destination
ID Flexible Tier Sub Pool
No. Name
10000 5 FTSP0005
5000 5 FTSP0005
Migration Progress Error Source
Status
2 FTSP0002 Active
C D
Migration Progress Error Source
Status
Active
Reserve
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
Code RAID Group
No. Name
50% 0x05 6 RLU006
E F G H
Code RAID Group
No. Name
99% 0x00 2 RLU0002 0x00100000000000
0% 0x01 14 RLU0014 0x00200000000000
105
Source
Volume
Start LBA No. Name
0x0010000000000000 3 FTV0003
I J K
Source
Volume
Start LBA No. Name
1 VOL0001
58 VOL0058
P2X0-1030-09ENZ0