Fujitsu ETERNUS DX80 S2 Cli User's Manual page 245

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set host-iscsi-name
The following example changes the host named "HBA21", assigning it host response number "2":
CLI> set host-iscsi-name -host-name HBA21 -host-response-number 2
The following example changes the host response definition of all the hosts with consecutively numbered
identifiers #1-#10 at the same time:
CLI> set host-iscsi-name -host-number 1-10 -host-response-number 5
The following example changes the host named "HBA21". The new alias name is "HBA22" and the number of
commands that can be accepted at the same time is 80.
CLI> set host-iscsi-name -host-name HBA21 -name HBA22 -cmdsn-count 80
The following example changes the format of the 0 (almighty) IP address for a host to IPv6 (IP address for
HBA21 = 0.0.0.0):
CLI> set host-iscsi-name -host-name HBA21 -ip-version ipv6
245
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0