Raid Group Syntax; Volume Syntax - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 1 Overview
1.2 The Command Syntax
• Two or more parameters might not be able to be specified for several commands. For details, refer to the
command descriptions.
• Since Thin provisioning pools and Flexible Tier Sub Pools use the same resource, the same number and
name cannot be used for both a Thin provisioning pool and a Flexible Tier Sub Pool. If the FTSP number or
FTSP name that is specified for a command is already used for a Thin Provisioning Pool, the command is
not executed.
1.2.8

RAID Group Syntax

There are two methods for specifying RAID group identifiers; RAID group numbers or RAID group names.
• RAID group number
A RAID group number is automatically created by the system when a RAID group is created. This is a
decimal number. RAID group numbers can be displayed by using the "show raid-groups" command.
RAID group numbers can be combined as follows:
- A single RAID group number: 1
- A list of RAID group numbers: 1,8,12
- A hyphenated range of RAID group numbers from a to z: 2-5
- A list of RAID group numbers, RAID group ranges, or both, separated by commas. Spaces are not
permitted before or after commas: 1,3,10-12
• RAID group name
A RAID group name must be specified when creating a RAID group. For details about the syntax, refer to
"1.2.4 Alias Name Syntax" (page
names. A RAID group name and a RAID group number cannot both be specified in the same command. Do
not include spaces before or after commas.
Two or more parameters might not be able to be specified for several commands. For details, refer to the
command descriptions.
1.2.9

Volume Syntax

There are two methods to specify a volume identifier; a volume number or a volume name.
• Volume number
A volume number is automatically created by the system when a volume is created. This is a decimal
number. Volume numbers can be displayed by using the "show volumes" command.
Volume numbers may be combined as follows:
- A volume number: 1
- A list of volume numbers: 5,10
- A hyphenated range of volume numbers from a to z: 2-5
- A list of volume numbers, volume ranges, or both, separated by commas. Spaces are not permitted
before or after commas: 1,3,10-12
20). Some commands accept a comma-separated list of RAID group
22
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0