Show Config-Information - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 5 Information Settings and Display
5.3 Maintenance > show config-information

show config-information

This command displays a list of the configuration information that is stored in the system.
■
Syntax
show config-information
■ Parameter
No parameters.
■ Output
# Information
# Two Time Before
# One Time Before
# Latest
A: Configuration date.
If the system has no configuration information, a hyphen (-) is displayed here.
■ Example(s)
The following example displays a list of the configuration information:
CLI > show config-information
Information
Two Time Before
One Time Before
Latest
Date Note
- -
2008-07-20 23:11:00 aabbccdd
2008-07-22 15:26:45 -
A
Date Note
- -
2008-07-20 23:11:00 aabbccdd
2008-07-22 15:26:45 -
648
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0