Export Enhanced-Mib - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.3 Network Management > export enhanced-mib

export enhanced-mib

This command exports the enhanced MIB file in the system to an FTP server.
■
Syntax
export enhanced-mib -port {maintenance|remote|fst} -server
[-server-view {enable|disable}] [-version {v1|v2cv3}] [-dir
■ Parameter
-port
-server
-user
-server-view Optional. This parameter specifies whether a file defined for use by ServerView is included or
-version
-dir
This parameter specifies the Ethernet port used to connect to the FTP server. For details, refer
to "1.11 Note for Specifying FTP Server" (page
maintenance
MNT port
remote RMT port
fst FST port (not supported by the ETERNUS DX80 S2/DX90 S2)
This parameter specifies the ftp server name to store the enhanced MIB file. The server name
format is IPv4 standard notation (a base 256 "d.d.d.d" string), IPv6 address format, or a fully
qualified domain name.
Example: -server 192.168.1.20
Example: -server fd80::abd0:223:ad
Example: -server foo.bar
This parameter specifies the user account name for access to the FTP server. This command
displays an FTP server password prompt.
not. If this parameter is omitted, the file is not included.
enable The file defined for ServerView is included.
disable The file defined for ServerView is not included.
Optional. This parameter specifies the version of an exported MIB file by using the SNMP
version.
If omitted, the default value "v1" is used.
v1 SNMP version v1. (default)
v2cv3 SNMP version v2c or v3
Optional. This parameter specifies the directory name on the FTP server where the MIB file is to
be stored. Since the file name cannot be specified within this string, use the "-filename"
parameter to specify the file name.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
server_name
directory
] [-filename
31).
503
login_user_name
-user
filename
]
P2X0-1030-09ENZ0