Fujitsu ETERNUS DX80 S2 Cli User's Manual page 556

Chapter 4 Function/System Settings and Display
4.4 Miscellaneous > set date
-dst
-from
-to
■
Example(s)
The following example sets the system date to 11:55 PM on January 12, 2009 GMT:
CLI> set date -time 20090112235500
24
Bangkok, Jakarta
25
Hong Kong, Manila, Singapore
26
Beijing, Taipei, Kuala Lumpur, Perth
27
Tokyo, Osaka, Kyoto, Fukuoka, Sapporo
28
Seoul
29
Adelaide
30
Guam, Sydney, Melbourne
31
Solomon Islands, New Caledonia
32
Wellington, Auckland, Fiji
Optional. This parameter specifies whether the daylight saving time is enabled or not. If
omitted, the existing setting is not changed.
enable DST is enabled.
disable DST is disabled.
• When "enable" is specified, both the starting and the ending information must be specified.
• When "disable" is specified, the starting nor the ending information cannot be specified.
Optional. This parameter specifies when DST (daylight saving time) starts, and must be
specified when enabling DST. If omitted, the existing setting is not changed.
There are two formats. One format is "MMDDhh": "MM" is the starting month number (01 –
12), "DD" is the starting day number (01 – 31), and "hh" is the starting hour in 24-hour time
(00 – 23). The other format is "MM,
{1st|2nd|3rd|4th|last},{sun|mon|tue|wed|thu|fri|sat},hh": "MM" is the starting month
number (01 – 12), both "{1st|2nd|3rd|4th|last}" and "{sun|mon|tue|wed|thu|fri|sat}" are
pairs, and means the starting day and the starting week. "hh" is the starting hour in 24-hour
time (00 – 23).
Optional. This parameter specifies when DST (daylight saving time) ends, and must be
specified when enabling DST. If omitted, the existing setting is not changed.
There are two formats. One format is "MMDDhh": "MM" is the ending month number (01 – 12),
"DD" is the ending day number (01 – 31), and "hh" is the ending hour in 24-hour time (00 –
23). The other format is "MM, {1st|2nd|3rd|4th|last},{sun|mon|tue|wed|thu|fri|sat},hh":
"MM" is the ending month number (01 – 12), both "{1st|2nd|3rd|4th|last}" and
"{sun|mon|tue|wed|thu|fri|sat}" are pairs, and means the ending day and the ending week.
"hh" is the ending hour in 24-hour time (00 – 23).
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
556
+7:00
+8:00
+8:00
+9:00
+9:00
+9:30
+10:00
+11:00
+12:00
P2X0-1030-09ENZ0