Fujitsu ETERNUS DX80 S2 Cli User's Manual page 268

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show lun-groups
When the parameter is specified, the details of the specified LUN group are displayed.
# LUN Group No.6
# LUN Group Name
# LUN Volume
# No.
# 3 3 VOLUME_003
C D
A: LUN group number
B: LUN group name
C: Logical unit number (LUN)
D: Volume number
E: Volume name
F: Volume status
G: Volume size
H: It shows whether or not the same volume identifier is defined between LUN groups.
If the same definitions exist, "Yes" is displayed in target volumes. Otherwise, "No" is displayed.
■ Example(s)
The following example displays a summary of all the existing LUN groups. In addition, the multi-group
volume information flag is displayed:
CLI> show lun-groups
LUN Group
No. Name
4 AG004
5 AG005
6 AG006
The following example displays details of LUN group #6:
CLI> show lun-groups -lg-number 6
LUN Group No.6
LUN Group Name AG006
LUN Volume
No. Name
1 1 VOLUME_001
2 2 VOLUME_002
3 3 VOLUME_003
4095 5 VOLUME_005
A
AG006
B
Status
Name
Available
E F
Multi-Group
Volumes
Yes
No
Yes
Status
Available
Available
Available
Available
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
Size(MB) Multi-Group
32 No
G
Size(MB) Multi-Group
32 No
32 No
32 No
32 No
268
Volume
H
Volume
P2X0-1030-09ENZ0