Fujitsu ETERNUS DX80 S2 Cli User's Manual page 609

Chapter 5 Information Settings and Display
5.1 Performance > show performance
-cm
-port
Optional. This parameter specifies the controller module number. This parameter can be
specified only when "-type cm" is selected. If omitted, the information for both controller
modules is listed.
For the ETERNUS DX80 S2/DX90 S2 and ETERNUS DX410 S2:
0 Controller module#0
1 Controller module#1
For the ETERNUS DX 440 S2 and ETERNUS DX8100 S2:
cm0cpu0 Controller module#0 CPU0
cm0cpu1 Controller module#0 CPU1
cm1cpu0 Controller module#1 CPU0
cm1cpu1 Controller module#1 CPU1
For the ETERNUS DX8700 S2:
cm0cpu0 Controller module#0 CPU#0
cm0cpu1 Controller module#0 CPU#1
cm1cpu0 Controller module#1 CPU#0
cm1cpu1 Controller module#1 CPU#1
cm2cpu0 Controller module#2 CPU#0
cm2cpu1 Controller module#2 CPU#1
cm3cpu0 Controller module#3 CPU#0
cm3cpu1 Controller module#3 CPU#1
cm4cpu0 Controller module#4 CPU#0
cm4cpu1 Controller module#4 CPU#1
cm5cpu0 Controller module#5 CPU#0
cm5cpu1 Controller module#5 CPU#1
cm6cpu0 Controller module#6 CPU#0
cm6cpu1 Controller module#6 CPU#1
cm7cpu0 Controller module#7 CPU#0
cm7cpu1 Controller module#7 CPU#1
auto Automatically (default)
Optional. This parameter specifies the host interface port number, and can be specified only
when selecting "-type port". Only one parameter can be specified at the same time. If omitted,
all the host interface ports are displayed.
Example: -port 001
For details, refer to "1.2.14 Host Interface Port Syntax" (page
xyz "x" is the controller module (CM) number, "y" is the CA number, and "z" is the host port
number.
Example: "123" indicates CM#1-CA#2-Port#3
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
609
25).
P2X0-1030-09ENZ0