Export Log - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 5 Information Settings and Display
5.3 Maintenance > export log

export log

This command exports the log files that are stored in the system to the specified FTP server.
■
Syntax
export log -port {maintenance|remote | fst} -server
filename
-filename
-last-24h {enable|disable}] [-iom-log {enable | disable}] [-divide {no|4mb|1mb|640kb}]
[-customer-info {enable|disable}] [-indicator {enable | disable}]
■
Parameter
-port
-server
-user
-filename
YYYYMMDD-hhmmss
[-starting-time
This parameter specifies which Ethernet port is used to connect to the FTP server. For details,
refer to "1.11 Note for Specifying FTP Server" (page 31)
maintenance
MNT port
remote RMT port
fst FST port (not supported by the ETERNUS DX80 S2/DX90 S2)
This parameter specifies the name of the FTP server that will receive the logs. The server name
format is IPv4 standard notation (a base 256 "d.d.d.d" string) or a fully qualified domain name
(FQDN).
Example: -server 192.168.1.20
Example: -server foo.bar
This parameter specifies the user name that can access the FTP server. This command displays
a password prompt.
This parameter specifies the name of the log file to be stored on the FTP server. When logs are
divided and stored, the sequential number and the extension (.log) are automatically added
to the specified filename. If the same filename already exists, it is overwritten.
Example(s)
Example: Log is divided into two files if needed.
-filename /tmp/log
"/tmp/log01.log" and "/tmp/log02.log" will be created automatically.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
server_name
-user
-ending-time
637
login_user_account
YYYYMMDD-hhmmss
|
P2X0-1030-09ENZ0