Blomberg KWD2330X Operating Instructions Manual page 7

Important instructions for safety and environment
Warning! This Appliance Must
Be Earthed
If the fitted moulded plug is
not suitable for your socket,
then the plug should be cut
off and an appropriate plug
fitted. Destroy the old plug
which is cut off as a plug
with bared cord could cause
a shock hazard if inserted
into a socket elsewhere in
the house.
The moulded plug on this
appliance
a 13 A fuse. Should the
fuse need to be replaced
an ASTABEAB approved
BS 1362 fuse of the same
rating must be used. Do not
forget to refit the fuse cover.
In the event of losing the
fuse cover the plug must not
be used until a replacement
fuse cover has been fitted.
Colour of the replacement
fuse cover must be the same
colour as that visible on the
pin face of the plug. Fuse
covers are available from
any good electrical store.
incorporates
6 / 34 EN
Important! Fitting A Different
Plug
As the colours of the
wires in the mains lead
of this appliance
not correspond
the coloured
identifying
in your plug proceed as
follows: (See diagram).
Connect the green-
1.
yellow or green (Earth)
wire to the terminal in the
plug marked 'E' or with
the symbol
green and yellow or green.
Connect the blue
2.
(Neutral) wire to the
terminal in the plug
marked 'N' or coloured
black.
Connect the brown
3.
(Live) wire to the terminal
in the plug marked 'L' or
coloured red.
Refrigerator / User Manual
may
with
markings
the terminals
or coloured