Table of Contents
Advertisement
Installation
3.6. Door open warning
(This feature is optional)
An audio warning signal will be given
when the door of your product is left open
for 1 minute. This warning will be muted
when the door is closed or any of the
display buttons (if any) are pressed.
3.7. Water connection
(This feature is optional)
Water system installation of the
refrigerator must be performed by a
competent person.
Depending on the model of the
refrigerator, you may not have to connect
to water main.First you must connect the
water hose to the refrigerator.
Check that following parts have been
delivered together with the product:
1. Union for connecting the water hose to
the rear of the refrigerator
2. 3 pieces of pipe clips (used to secure the
water hose)
3. 5-meter long water hose (1/4 inch in
diameter)
4. (4) Cold mains water valve with mesh
filter (tap adapter)
5. (5) External water filter.
1
2
3
4
Refrigerator / User Manual
3.8. Connecting the water
hose to the refrigerator
1. Slip the union (b) onto the water hose (a).
2. Push the water hose downwards firmly
3. Tighten the union (c) by hand to secure it
C
*5
11 / 34 EN
to slip it onto the water inlet valve (c).
onto the water inlet valve.
Normally, you are not required
to tighten the union with a tool.
However, you can use a spanner or
pliers to tighten the union if there is
a leakage.
a
a
b
2
1
c
Hide quick links:
Advertisement
Table of Contents
