Connecting Of The Water Hose To The Cold Water Mains Line - Blomberg KWD2330X Operating Instructions Manual

Installation
3.9. Connecting of the water
hose to the cold water mains line
(This feature is optional)
If you will use the refrigerator by
connecting it to the cold water mains line,
you must install a standard 1/2" valve
connector to the cold water installation
of your home. If this valve is not present
or you are not sure, consult a qualified
plumber.
1. Separate the union from the tap adaptor.
2. Install the tap adaptor to standard 1/2"
valve connector.
3. After inserting the water hose to the
union, install it to the tap adaptor and
insert to the union to the tap adapter.
4. Tighten the union by hand.
A
WARNING:
hose to suitable points by means
of the clips supplied to avoid
any damage or displacement or
accidental disconnection.
A
WARNING:
water valve, make sure that there
is no leakage at both connection
points of the water hose. If there
is a leakage, turn off the valve
immediately and tighten all joints
again using a spanner or a pliers.
A
WARNING:
standard 1/2" valve connector is
available and completely turned off
on your cold water mains line.
Secure the water
After turning on the
Make sure that
12 / 34 EN
Refrigerator / User Manual