Drip Tray - Blomberg KWD2330X Operating Instructions Manual

Operating the product
5.14. Filling the water
dispenser's tank
Water tank filling reservoir is located
inside the door rack. Open the reservoir
cover and pour in clean drinking water.
And then, close the lid.

5.15. Drip tray

*optional
Water that dripped while using the water
dispenser accumulates in the spillage
tray. You can remove the tray by pulling
it to yourself or pressing on its edge
(depending on the model). Remove the
water with a sponge or a soft cloth.
• Use clean and pure potable water only.
• Capacity of the water tank is 3 liters; do
not overfill.
• Push the arm of the water dispenser
with a rigid glass. If you are using dis-
posable plastic glasses, push the arm
with your fingers from behind the glass.
Cleaning the water tank
• Remove the water filling reservoir inside
the door rack.
• Remove the door rack by holding from
both sides.
Refrigerator / User Manual
• Grab the water tank from both sides
and remove it with an angle of 45°.
• Clean the water tank by removing its lid.
Important:
Components of the water tank and water
dispenser should not be washed in dish-
washer if the glass tank is plastic. Glass
water tanks can be cleaned in dishwash-
ers.
,
25 / 34 EN