Electrical Connection; Adjusting The Feet; Illumination Lamp - Blomberg KWD2330X Operating Instructions Manual

Installation

3.3. Electrical connection

Connect the product to a grounded outlet
protected by a fuse complying with the
values in the rating plate. Our company
shall not be liable for any damages
that will arise when the product is used
without grounding in accordance with the
local regulations.
• Electrical connection must comply with
national regulations.
• Power cable plug must be within easy
reach after installation.
• The voltage and allowed fuse or breaker
protection are specified in the Rating
Plate which is affixed to interior of the
product. If the current value of the
fuse or breaker in the house does not
comply with the value in the rating
plate, have a qualified electrician install
a suitable fuse.
• The specified voltage must be equal to
your mains voltage.
• Do not make connections via extension
cables or multi-plugs.
B
WARNING:
cable must be replaced by the
Authorised
WARNING:
B
failure, it should not be operated
unless it is repaired by the
Authorised Service Agent! There is
the risk of electric shock!

3.4. Adjusting the feet

If the product stands unbalanced
after installation adjust the feet. Taking
help from someone to slightly lift the
refrigerator will facilitate this process.
WARNING:
B
product. Product must not be
plugged in when adjusting the
feet. There is the risk of electric
shock!
Turn the front feet to balance the product.
The corner where the foot exists is
lowered when you turn in the direction of
arrow and raised when you turn it in the
opposite direction.

3.5. Illumination lamp

Do not attempt to repair yourself but call
the Authorised Service Agent if the LED
illumination lamps do not go on or are out
of order.
10 / 34 EN
Damaged power
Service Agents.
If the product has a
First unplug the
Refrigerator / User Manual