Reset Station Passcodes To Default - Samsung DCS-816 System Administration And Special Features Manual

SAMSUNG
DCS-816
ACTION
1.
Select 505
2. Enter new time and date using above table
3. Verify time and date
Reenter if necessary
4. Press the right soft key to return to step 2
OR press TRSF to store and exit programming
OR press SPEAKER to store and advance to the
next program.
If you have entered invalid data, you will receive an [INVALID ENTRY] message for three
seconds. Reenter the correct date and time. If the information you entered is incorrect, re-
peat the procedure.

3.3 RESET STATION PASSCODES TO DEFAULT

Individual keyset users can set or change their individual passcodes. These passcodes
are used to lock and unlock keysets, override toll restriction (call barring) and access the
DISA feature. At times, it may be necessary for the system administrator to reset a sta-
tion's passcode to default "1234". This program is used only to reset the passcodes and
cannot be used to display them.
PROGRAM KEYS
UP & DOWN
HOLD
Open customer programming and follow the instructions below.
ACTION
1.
Select 101
2. Dial the station number (e.g., 205)
OR use the UP and DOWN keys to scroll through the
keyset numbers and press the right soft key to move
the cursor right
3.
Press HOLD to reset passcode
Select the extension number.
Press to reset the passcode.
3 - 2
System Administration and Special Features Guide
DISPLAY
OLD:1 0 6 0 1 9 8 : 1 2 2 0
NEW : MMDDYY:HHMM
OLD:1 0 6 0 1 9 8 : 1 2 2 0
NEW:2 0 7 0 7 9 8 : 1 5 4 5
OLD:2 0 7 0 7 9 8 : 1 5 4 5
NEW: MMDDYY:HHMM
DISPLAY
[201]
PASSCODE:
[205]
PASSCODE:
[205]
PASSCODE: 1234
March 1999
[MMC 101]
PAS S CO DE
✱✱✱✱
PAS S CO DE
✱✱✱✱
PAS S CO DE