Caller Id Display - Samsung OfficeServ SMT-i5243 User Manual

OfficeServ 7030
TECHNICAL MANUAL

1.18 CALLER ID DISPLAY

The station user can change the order in which the CLI, Caller ID and/or ANI information is
displayed on an LCD set during a transferred call.
CLI display options are the following:
0. NO DISPLAY
1. NUMBER FIRST
2. NAME FIRST
Caller ID display options are the following:
0. NO DISPLAY
1. NUMBER FIRST
2. NAME FIRST
ANI display options are the following:
0. NO DISPLAY
1. NUMBER FIRST
2. NAME FIRST
ACTION
1. Press the transfer key followed by 119
Display shows
No CLI data will be displayed.
The CLI number received from the Central Office will be
displayed first.
The CLI name received from the Central Office will be displayed
first.
No CID data will be displayed.
The CID number received from the Central Office will be
displayed first.
The CID name received from the Central Office will be displayed
first.
No ANI data will be displayed.
The ANI number received from the Central Office will be
displayed first.
Since there is no name sent by the Central Office, The only time
you will receive a name is when your service company has
programmed a name to be associated with the number
otherwise your display will read "no ANI name".
1.25
USER INSTRUCTIONS
PART 1 MAY 2010
DISPLAY
[201] CID DISP
NUMBER FIRST
Home Page