Storage - Toro RT600 Operator's Manual

4. Fully insert the seat-lock pin through the holes in the
mounting plates (Figure
5. Install the hairpin into the hole in the seat-lock pin
(Figure 69).
Lowering the Seat
1. Remove the hairpin from the seat-lock pin
2. Remove the seat-lock pin from the mounting plates
(Figure 70).
3. Move the hand rail (attached to the back of the seat)
down until the hole in the seat post is aligned with the
holes in the pivot brackets
4. Install the seat-lock pin and the hairpin
70).
(Figure
(Figure 70).
(Figure 69).

Storage

•
When you are not using the backhoe, store it indoors in a
clean and dry place.
Note: If you are not able to store the backhoe indoors,
cover the backhoe to keep moisture, dirt, and debris.
69).
•
Grease all exposed cylinder rods to prevent them from
rusting.
•
Repair or replace any worn, damage, or missing parts on
the backhoe.
•
Install dust caps onto the hydraulic nipples to prevent the
hydraulic system from contamination.
40