Configuring The Auxiliary Port; Figure 28: Auxiliary Port Setup Screen - NorthStar 961 Install Manual

SECTION THREE - Interfacing

Configuring the auxiliary port

Page 52
equipment, the 961/962 offers the flexibility of turning off the NMEA
0183 checksum:
1. At the PORT SETUP screen, press the
0183 SUM field, then press the
2. Press the
3. Press the
unchanged).
4. Press the
The auxiliary (aux) port is a general-purpose port used to transmit
differential corrections (interfacing with an external device that accepts
SC-104 differential corrections). If the 961/962 has an internal differential
receiver, you can use the aux port to transmit its differential corrections
to another device that accepts them.
To access the aux port options:
key to access the SERVICE MENU screen.
1. Press the
2. Press the
3. Press the
SETUP screen with configurable options for output format and
NMEA 0183 baud rate.
To change the aux port settings:
1. Press the
press the key.
key.
to change the setting from ON to OFF.
key (or press
key to go back to the PORT SETUP screen.
key to display the PORT SETUP screen.
key. The 961/962 displays the AUXILIARY PORT

Figure 28: Auxiliary port setup screen

to highlight either FORMAT or BAUD, then
961/962 INSTALLATION MANUAL Revision A
to highlight the
to leave the option