System Overview - NorthStar 961 Install Manual

Gps chart navigators
Hide thumbs Also See for 961:
Table of Contents

Advertisement

SECTION TWO - Installation

System overview

Page 6
The system is shipped ready to install and operate. It is recommended
that you follow the steps below:
1. Check the shipping carton for any damage, and immediately report
any damage to the carrier. Save all packing material in case you have
to return the system to the factory for repair or evaluation. For
return procedures, see "Returning a 961/962 for service" beginning
on page 4.
2. Unpack the cartons. Compare the Northstar 961/962 Packing List
(part number GM1703, included in the carton) with the contents in
those cartons and with what you ordered.
3. Make sure you have the tools necessary to complete the installation.
4. Review the components of a proper installation. For suggestions and
further information, see "Installation considerations" beginning on
page 7.
5. Choose the best location to mount the control head(s) and processor.
For suggestions and further information, see "Choosing a system
location" beginning on page 8.
6. Choose the best location to mount the antenna. For suggestions and
further information, see "Installing the antenna" beginning on
page 15.
7. Review the section on wiring the 961/962. For details, see "Wiring
the 961/962" beginning on page 13.
8. Install the control head(s), processor, and antenna. You may want to
temporarily install the antenna, then try operating the 961/962 to
ensure the antenna location works well before permanently
installing the antenna.
9. Turn on the system. For details, see "Turning the system on and off"
beginning on page 28.
10.To ensure that the system is installed correctly and running
properly, perform a functional test. For details, see "Testing and
troubleshooting the 961/962" beginning on page 34.
11.If desired, interface the NMEA output ports. For details, see
"Configuring the NMEA output ports" beginning on page 44. If
desired, interface the auxiliary port, see "Configuring the auxiliary
port" starting on page 52.
961/962 INSTALLATION MANUAL Revision A

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

962

Table of Contents