Understanding Tidetrack - NorthStar 957 Operator's Manual

Table 7: Beep and honk settings for all alarms (continued)
Sound Type
Honk Anchor alarm

Understanding TideTrack

957 Operator's Manual, Rev. B
Setting(s)
ANCHOR ALARM
Set
ON
HONK OUTPUT
Set
ANCHOR ALM
™
The 957 calculates tide information for any of over 3,540 NOS/
NOAA tide stations. To display this information, press the
STAR key until you see the TIDE TRACK screen.
The entire U.S. coastline--including Alaska and Hawaii--is
covered, plus many Caribbean islands and eastern and western
Canada. Tides can be displayed for any date up to the year
2010. Data is from the official tide-table predictions and
should be as accurate as the printed tables. For more
information about tides, see Tide Tables published by the NOS/
NOAA, Rockville, Maryland 20852.
The water height for any 24-hour period is displayed for the
selected NOAA tide station.
The name of the selected tide station and the selected day are
shown at the top of the screen.
Chapter 10 - Using Special Functions
Description
to The alarm icon flashes, and the alarm
beeps (if the alarm audio is on), then
after 10 seconds the honk sequence
to starts.
Page 131