NorthStar 957 Operator's Manual page 108

Chapter 7 - Understanding the Routes Function
Erasing an entire
route
Editing a route
you're navigating
along
Page 100
Removing waypoints from a route
1. Press the CURSOR PAD to move the left-hand pointer
directly onto the waypoint you want to remove.
2. Press the REMOVE menu key.
3. Press the ENTER key (or the CLEAR key to cancel the
removal).
To erase a route:
1. On the ROUTES screen, press the CURSOR PAD to select
the route you want to erase.
2. Press the ERASE menu key.
3. Press the ENTER key (or the CLEAR key to cancel the
action).
If you change a route you're navigating along, the 957 stores
the changes, but they won't appear in the copy of the route
you're navigating along. To enable these changes, you must
start following the route again (see "Navigating along routes"
starting on page 108).
957 Operator's Manual, Rev. B